Product ID:LUXURY WOOD FINISH-SATIN, 129
MSDS Date:06/01/1995
FSC:8010
NIIN:00N056607
MSDS Number: CCYKG

EVR-GARD COATINGS CO

16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

5

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 29.57%

OSHA PEL 125 PPM (MFR)

ACGIH TLV: 125 PPM (MFR)

26 @ 100F.

CAS: 64742-89-8

Fraction By Weight: 25.77%

OSHA PEL 300 PPM (MFR)

ACGIH TLV: 300 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:EXCESSIVE INHALATION OF
VAPORS MAY RESULT IN IRRITATION OF NOSE, THROAT AND EYES,
DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE. SYMPTOMS DISAPPEAR
WHEN EXPOSURE CEASES. UNCONSCIOUSNESS IN EXTREME CASES. SKIN
CONTACT:MAY CAUSE IRRITATION. SKIN ABSORPTION:IRRITANT. AFFECTED
AREAS WILL SHOW (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SIGNS OF REDNESS AND RASH IF NOT
WASHED W/SOAPY WATER IMMEDIATELY. EYE CONTACT:MAY CAUSE IRRITATION.
INGESTION:IRRIT OF RESP TRACT CHARACT BY HDCH, DIZZ, STAG, CONFUSN
& UNCON & COMA IN EXTRE ME CASES. REPORTS HAVE SHOWN THAT RPTD &
PRLNG OCCUP OVEREXP TO SOLVS CAN CAUSE PERM BRAIN DMG & NERV SYS
DMG.
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED CONTACT MAY
CAUSE DERMATITIS.

First Aid:INHAL:REMOVE PATIENT TO FRESH AIR. EYES:FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES. SKIN:REMOVE SOAKED CLOTHING & WASH
AFFECTED AREA W/SOAPY WATER IMMEDIATELY & THOROUGHLY. APPLY LOTION
OR OIL TO AFFECTED AREA AFTER THOROUGH WASHING. INGEST:DO NOT
INDUCE VOMITING. CALL MD IMMEDIATELY.

Flash Point:55.0F,12.8C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
FIGHT AS VOLAT LIQ FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. KEEP AWAY FROM AREAS EXPOS TO FIRE.
Unusual Fire/Explosion Hazard:AVOID APPLICATION IN AREAS OF PILOT
LIGHTS, SPKS/OTHER IGNIT SOURCES AS VAPS MAY ACCUM ON FLOOR &
IGNITE. KEEP CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE(SUPDAT)

Spill Release Procedures:ABSORB SPILLED MATERIAL W/ABSORBENTS, SUCH AS
SAWDUST, CLAYS, ETC & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME/SOURCES
OF IGNIT. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF FIRE,
REMOVE CLOSED CNTNRS FROM AREAS EXPOSED TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATL &
VAPS. THESE MUST BE CONSIDERED HAZ & DISPOSED OF I/A/W PROPER HNDLG
PROCS PRESCRIBED FOR HAZ CHEMS. AVOID PROLONGED CONT/OVEREXP.
PROVIDE ADEQ VENT A T ALL TIMES WHEN APPLYING THIS PRODUCT.

Respiratory Protection:USE OF NIOSH APPROVED RESPS IS REC WHEN USING
SOLVENT BASED COATINGS. WHEN LEVEL OF SOLVENT VAPORS IS NOT KNOWN
OR EXCEEDS LEVEL AT WHICH REGULAR RESPIRATORS ARE EFFECTIVE, USE OF
NIOSH APPROVED RESPS SUCH AS TC-19C- IS HIGHLY RECOMMENDED.
Ventilation:BE SURE TO PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL
TIMES. SERIOUS HLTH PROBS COULD RSLT FROM RPTD & PRLNG EXPOS.
Protective Gloves:NEOPRENE OR BUNA N GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING THIS PRODUCT & ALL CHEMICALS.
Supplemental Safety and Health
EXPLO HAZ:WHEN NOT IN USE.

Boiling Pt:B.P. Text:>168F,>76C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.9 (H*2O=1)
VOC Pounds/Gallon:486
VOC Grams/Liter:4.06
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:TRANSLUCENT FINISH; PAINT THINNER ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIS. LONG TERM CONTACT W/WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION & FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE &/OR CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CONTAINERS & DISPOSE IN
APPROVED DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.